Tool Box Shocks
This is a tool Box that features 20 inch 45 pound gas spring 400 spring rod struts and lift, the top lid can be opened to remove the struts and the prop lift.
Delta Tool Box Lift Supports
This heavy-duty tool Box lift supports up to 10 inches of lifting capacity in 35 lb gas Shocks and the struts allow for accurate control over the tool Box lid and can be used to support a wide variety of materials, the tool Box lift can also be used to support rv doors and capes. This is a lift support Shocks kit for your 18, 5 uucp toolbox cover. It includes 45 lift support shocks, making three sets of Shocks available, this can help to improve cornering performance and provide a better strength to weight ratio when presented with a heavy load. How to measure tool Box shocks: 1, place the tool Box Shocks on the front of the truck, in the back end. Look for any locating screws or bolts that may be holding the Shocks on the truck, these are found below the tool Box cover in the upper right-hand side. Look for any gas spring features, which will allow you to adjust the pressure of the shocks, the gas spring is found under the tool Box cover in the lower left-hand side. Let the tool Box Shocks cool before feeling the need to adjust them again, this will help ensure the most resistance against evenly pressures. When you're back in work mode, you can adjust the Shocks easily with wrench, if you're in a where to tool box, you'll find a different approach. In this case, you'll need a different approach to measur the shocks, you can either use a track or a caliper to measure the distance from the center of the tool Box to the edge of the blade. However, the caliper will not measure the correct amount of space per inch, which is why you need the tool Box cover to lift the truck from the ground, if you're finding the Shocks too loose, you can use a richest stone you find to help them go back in the right direction. You can gently tighten the Shocks with a small wrench, looking for a reliable gas shock strut spring for your tool box? Search no more than the 17 inch 100 n heavy-duty gas shock strut spring. This spring is designed to handle high weight from the tool Box to larger household items.
.
